Troubleshooting and solutions for failures during the bottle blowing process of a blow molding machine?

Publish Time:

2025-04-16

Solution: Disconnect the waterway connecting rubber tube, and use low-pressure air and alcohol to blow and clean the waterway.

1.灯箱水道高温报警。

处理办法：拆开水道连接橡胶管，用低压气和酒精对水道进行吹扫，和清洗。

2.夹爪故障

处理办法：调节滑台高度，或者夹爪位置。

3.动作卡死。

处理办法：重启机器。

4.无法手动原点

处理办法：查看移位一夹爪，移位二夹爪和变节距定位板，是否卡到相应的位置，若无，手动使他们卡到相应的位置，然后原点。

5.动作不到位

处理办法：查看是否有东西卡到。调节气体流量阀。

6.排气声音过响

处理办法：查看高压排气消声器是否破损或者脱落。

7.胚道下胚不均匀

处理办法：调节胚斗位置。

In blow molding, compressed air serves two purposes: firstly, it expands the parison to tightly adhere

2025-04-16

Hollow blow molding Hollow blow molding is an important method of thermoplastic molding

2025-04-16

Plastic product processing refers to the process of transforming plastic raw materials into products

2025-04-16

The working principle of a plastic mold is a rather complex process, involving multiple steps such as melting

2025-04-16

The processing technology of plastic molds is a complex and delicate process, involving multiple links and professional technical knowledge.

2025-04-16

Each heating zone has independent temperature control; the position and distance of the lamps

2025-04-16

Business License

Address: No. 33, Yuantong Road, Dongcheng, Huangyan District, Taizhou City, Zhejiang Province
Tel: +86-18657601860
Postcode: 318020
Email: junsuncn@foxmail.com
Website: www.bottle-machine.com